[ Home ] [ Up ] [ 67-68 Mustang ] [ 69-70 Mustang ] [ 71-73 Mustang ] [ 74-78 Mustang ] [ 79-93 Mustang ] [ 94-98 Mustang ]

69-70 Mustang

69-70 MUSTANG

Call all orders in 706 333 1955

the less expensive hood is a light weight racing hood that will need to be pined on without the hinges ...the other is a light weight street hood that can use the hinges and the original latch. other than that they are the same

69-70 69 Style Pro Front End

 - Light Weight Version - is intended for racing applications and does not come with a hinge kit.    
 - These unit generally only weigh in at approx 30#  +/- .  
 - Grey exterior gellcoat finish can be easily sanded and prepared for finishing.
 - Smooth 90° roll into wheel well openings, generally extends in a full  ¾".
 - Headlight blanks require opening to install light bowl and trim.
 - The units do come with mold flashing - which must be fared in before preparing for paint. 

 IMPORTANT - Please specify the type of racing that the unit will be used for, so we may build and reinforce your unit accordingly. Units manufactured for "Street Racing" have a heavier roving on all edges to reduce the chance of tearing (under to stress of impact) and usually weigh 10 - 15# more than a Drag Racing unit.  Units manufactured for "Sand Drag" or "Baja" style racing are built so as to be midway between the Street Drag and the Street Race units.                          

69-70 3" Dominator™ Cowl Hood  Heavy Duty Features:  - Dominator™ style design. (3" Clearance)  - 90 edges on both sides help to maintain fender    contours.  - Full inner frames - utilizes OEM hinge    and latch. Additional hold downs recommended.  - Fully lined - smooth gellcoated inner.  - Sandable gray gellcoated exterior finish.  - Coremat® reinforced skin reduces "print thru".  - Scoop and Inner liner come closed - opening     required for clearance.		69-70 Stock Hood  Heavy Duty Features:  - 90 edges on both sides help to maintain fender    contours.  - Full inner frames - utilizes OEM hinge    and latch. Additional hold downs recommended.  - Fully lined - smooth gellcoated inner.  - Sandable gray gellcoated exterior finish.  - Coremat® reinforced skin aids in reduction of     print-thru
	69-70 Fastback Trunk Lid  Race Weight Features:  - Full perimeter bracing.  - 90 edges on both sides help to maintain body    contours.  - Black lacquered fiberglass textured inner.  - Sandable gray gellcoated exterior finish.  - Reinforced skin aids in reduction of print-thru.	69-70 Door  Race Weight Features:  - Detailed interior panel.  - Will accept original handle, hinge & latching    mechanism.  - All holes come closed & must be opened for    installation.   - Available in Light Weight design only.  - Strictly intended for Racing application only!  - Fully gellcoated inner & outer surface.  - Plastic windows & aluminum top post required    attached to inner door frame.

DHR's Fiberglass and Body Parts Shipping and Policies