79-82 Stock Hood
   Heavy Duty Features:
 - 90 edges on both sides help to
    maintain fender contours.
 - Full perimeter inner frames - utilizes
    OEM hinge & latch.
 - Black lacquered fiberglass textured
    inner finish.
 - Sandable gray gellcoated exterior
    finish.
 - Coremat® reinforced skin aids in
     reduction of print-thru.

79-82 Cowl Induction 2" Hood
   Heavy Duty Features:
 - 90 edges on both sides help to
    maintain fender contours.
 - Full perimeter inner frames - utilizes
    OEM hinge & latch.
 - Black lacquered fiberglass textured
    inner finish.
 - Full Open inner chamber provides 2"
   of additional clearance.
 - Coremat® reinforced skin.

79-82 Custom Turbo Hood
   Heavy Duty Features:
 - Styled after the original 80's design.
 - 90 edges on both sides help to
    maintain fender contours.
 - Full perimeter inner frames - utilizes
    OEM hinge & latch.
 - Black lacquered fiberglass textured
    inner finish.
 - Full Open inner chamber provides 2"
   of additional clearance.
 - Coremat® reinforced skin.
 

83-86 Stock Hood
   Heavy Duty Features:
 - 90 edges on both sides help to
    maintain fender contours.
 - Full perimeter inner frames - utilizes
    OEM hinge & latch.
 - Black lacquered fiberglass textured
    inner finish.

- Sandable gray gellcoated exterior
    finish.
 - Coremat® reinforced skin aids in
     reduction of print-thru.

83-86 Cowl Induction 2" Hood
   Heavy Duty Features:
 - 90 edges on both sides help to
    maintain fender contours.
 - Full perimeter inner frames - utilizes
    OEM hinge & latch.

 - Black lacquered fiberglass textured
    inner finish.
 - Full Open inner chamber provides 2"
   of additional clearance.
 - Coremat® reinforced skin.

 87-93 Custom Turbo Hood
   Heavy Duty Features:
 - Styled after the original 80's design.
 - 90 edges on both sides help to maintain fender
   contours.
 - Full perimeter inner frames - utilizes OEM hinge
   & latch.
 - Black lacquered fiberglass textured inner.
 - Sandable gray gellcoated exterior finish.
 - Coremat® reinforced skin.

79-93 Door       
 Race Weight Features:
 - Smooth interior panel.
 - Will accept original handle, hinge & latching
   mechanism.
 - All holes come closed & must be opened for
   installation. 
 - Available in Light Weight design only.
 - Strictly intended for Racing application only!
 - Fully gellcoated inner & outer surface.
 - Plastic windows required  attached to inner
   door frame

87-93 4" Dominator™ Hood
   Heavy Duty Features:
 - Cowl Induction style design. (3.5" Clearance)
   TECHHOOD™ design.
 - 90 edges on both sides help to maintain fender
   contours.
 - Full inner frames - utilizes OEM hinge & latch.
 - Fully lined - smooth gellcoated inner.
 - Sandable gray gellcoated exterior finish.
 - Coremat® reinforced skin reduces "print thru".
 - Scoop and Inner liner come closed.

 87-93 Mach-I Hood
   Heavy Duty Features:
 - Cowl Induction style design. (1" Clearance)
   TECHHOOD™ design.
 - 90 edges on both sides help to maintain fender
   contours.
 - Full inner frames - utilizes OEM hinge & latch.
 - Fully lined - smooth gellcoated inner.
 - Sandable gray gellcoated exterior finish.
 - Coremat® reinforced skin reduces "print thru".
 - Scoop and Inner liner come closed.

87-93 GT-500 Hood
   Heavy Duty Features:
 - GT-500 style design. (2" Clearance)
   TECHHOOD™ design.
 - 90 edges on both sides help to maintain fender
   contours.
 - Full inner frames - utilizes OEM hinge & latch.
 - Fully lined - smooth gellcoated inner.
 - Sandable gray gellcoated exterior finish.
 - Coremat® reinforced skin reduces "print thru".
 - Scoop and Inner liner come closed.

87-93 Custom Turbo Hood
   Heavy Duty Features:
 - Styled after the original 80's design.
 - 90 edges on both sides help to maintain fender
   contours.
 - Full perimeter inner frames - utilizes OEM hinge
   & latch.
 - Black lacquered fiberglass textured inner.
 - Sandable gray gellcoated exterior finish.
 - Coremat® reinforced skin

 87-93 6" Dominator Cowl Hood w/Cowl pnl
   Race Weight Features:
 - Designed w/Dominator style scoop.
 - Full perimeter bracing & rear baffle installed.
 - Black lacquered fiberglass textured inner.
 - Sandable gray gellcoated exterior finish.
 - Reinforced skin.
 - Dominator scoop provides +/- 6" clearance at
   rear & +/- 5" clearance at stock carb location.
 - 90° Edges require sanding for desired fit.
 - One piece construction - Yes, it comes out of
    the mold this way!

87-93 6.5" Aero Hood
   Race Weight Features:
 - Designed w/Pro-Stock style scoop for  
   maximum ram air flow.
 - Full perimeter bracing & rear baffle installed.
 - Black lacquered fiberglass textured inner.
 - Sandable gray gellcoated exterior finish.
 - Reinforced skin.
 - Scoop comes closed. (Size 33"x6.5"x18")
 - Edges require sanding for desired fit.
 - One piece construction - Yes, it comes out of
    the mold this way!

87-93 7.5" Torpedo Hood w/Cowl pnl
   Race Weight Features:
 - Designed w/Pro-Stock style scoop for
   maximum ram air flow.
 - Full perimeter bracing & rear baffle installed.
 - Black lacquered fiberglass textured inner.
 - Sandable gray gellcoated exterior finish.
 - Reinforced skin.
 - Scoop comes closed. (Size 48"x7.5"x18")
 - Edges require sanding for desired fit.
 - One piece construction - Yes, it comes out of
    the mold this way!

79-93 Trunk Air Foil
  - One Piece Construction
  - Designed for fastbacks only.
  - Smooth grey gellcoat finish.
  - Designed for fastbacks only.
  - Smooth gray gellcoat finish

 79-93 Trunk Lid
   Race Weight Features:
 - Black lacquered fiberglass
   textured inner.
 - Sandable gray gellcoated
   exterior finish.
 - Reinforced skin.

79-93 Hatch
   Race Weight Features:
 - Black lacquered fiberglass
   textured inner.
 - Sandable gray gellcoated
   exterior finish.
 - Reinforced skin.

 79-93 '93 GT Front End                           
 Features:
 - Grey exterior gellcoat finish can be easily sanded and prepared for finishing.
 - Smooth 90° roll into wheel well openings, generally extends in a full  ¾".
 - The interior finish is Fiberglass texture - coated in black lacquer - it comes without wheel wells.
 - Light Weight Version - is intended for racing applications and does not come with a hinge kit.    
 - These unit generally only weigh in at approx 30#  +/- .  

 IMPORTANT - Please specify the type of racing that the unit will be used for, so we may build and reinforce your unit accordingly. Units manufactured for "Street Racing" have a heavier roving on all edges to reduce the chance of tearing (under to stress of impact) and usually weigh 10 - 15# more than a Drag Racing unit.  Units manufactured for "Sand Drag" or "Baja" style racing are built so as to be midway between the Street Drag and the Street Race units.